当前位置：物联沃-IOTWORD物联网 > 技术教程 > STM32-MDK CubeMX基础使用指南
代码收藏家代码收藏家 技术教程

STM32-MDK CubeMX基础使用指南

一、安装教程（转载）

【stm32学习笔记】Keil5+stm32cubemx安装使用教程(准备步骤)_keil cube-CSDN博客文章浏览阅读1.4w次，点赞39次，收藏133次。目录（一）keil5+mdk（1）keil是什么？（2）keil5的安装（3）keil5的破解（mdk）本片文章将主要介绍keil5和cube的安装流程（一）keil5+mdk（1）keil是什么？通俗的来说keil就是用来写代码的，不管是写什么代码肯定都需要一个IDE比如说理工专业的基础课一般都会有C语言或者python等课程，可能用过Code::Blocks,Eclipse，Visual Studio等软件，keil与他们类似，只是它同时集成了编译、烧录等一系列功能，同时具有一些自己特有的标识_keil cubehttps://blog.csdn.net/weijie_wang/article/details/120756019

二、建立工程

（一）、选择开发板

（二）、常规MAX配置

更换烧录调试设置（必须配置！！！否则会锁板子）

启用外部高速晶振

在右边那一竖列随便输一个72，然后回车如下

再次回车得到如下

更改".c"，".h"配置文件的生成（大工程必备）

精简工程，减少编译时间

设置工程路径和名称，并生成

（三）、常规MDK配置

ST-Link烧录前配置

确认退出

MDK中文配置（转载）

Keil中文显示设置_keil uvision5怎么改成中文版-CSDN博客

MDK格式化配置（转载）

Keil5-MDK的格式化代码工具及添加快捷方式_keil5格式化代码-CSDN博客

三、工程结构

2024_8_13

（一）、书写结构（个人）

参考文章：

STM32CubeIDE的初始main.c里都是什么_user code begin pfp什么意思-CSDN博客

/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2024 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "usart.h"
#include "gpio.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{
  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_USART1_UART_Init();
  /* USER CODE BEGIN 2 */

  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */
  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }
  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
  {
    Error_Handler();
  }
}

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
 USER CODE BEGIN Header (添加头部注释或代码)

/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2024 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
/* USER CODE END Header */

Private includes（用户私有头文件定义）
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */

/* USER CODE END Includes */
Private typedef（用户私有类型定义）

/* Private typedef ———————————————————–*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

Private define（用户私有宏定义）

/* Private define ————————————————————*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */

Private macro（宏指令？）

/* Private macro ————————————————————-*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

Private variables（用户私有变量定义）

/* Private variables ———————————————————*/

/* USER CODE BEGIN PV */

/* USER CODE END PV */

Private function prototypes（用户私有函数原型）
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */
Private user code（用户主要逻辑代码书写区域）

/* Private user code ———————————————————*/

作者：Canti

物联沃分享整理
物联沃-IOTWORD物联网 » STM32-MDK CubeMX基础使用指南

代码收藏家 普通

分享到：

相关推荐

发表回复