这里写目录标题

  • 一、烧录
  • 1、 Can not connect to target!【ST-LINK烧录】
  • 一、烧录

    1、 Can not connect to target!【ST-LINK烧录】


    烧录突然 If the target is in low power mode, please enable “Debug in Low Power mode” option from Target->settings menu
    然后就:Can not connect to target!

    含泪找了很多文章参考
    原因:进入了低功耗模式
    需要复位
    【but】 杂家电路板设计之前没有设计复位键

    解决:把芯片NRST接地

    打开软件连接一下,注意会卡住

    然后你断开GND就可以重新连接了

    又重新连接上了

    作者:iot鑫鹏

    物联沃分享整理
    物联沃-IOTWORD物联网 » STM32问题集

    发表回复